|
| موك: | 5 قطع |
| السعر: | negotiable |
| طريقة الدفع: | خطاب الاعتماد، D/A، D/P، T/T |
| سعة التوريد: | 500 |
5.85-8.2GHz WR-137 WAVEGUIDE LOAD
A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.
Absorption of Microwave Energy:
A WAVEGUIDE LOAD converts electromagnetic wave energy into heat, preventing standing waves. Any high‑power system requires a WAVEGUIDE LOAD to terminate unused ports.
Reduction of Voltage Standing Wave Ratio (VSWR):
By absorbing nearly all incident power, a WAVEGUIDE LOAD maintains a low VSWR (typically <1.05), ensuring signal source stability and measurement accuracy.
Protection of Sensitive Components:
During transmitter testing or amplifier tuning, a WAVEGUIDE LOAD acts as a dummy antenna. Without a WAVEGUIDE LOAD, reflected power could destroy expensive devices such as magnetrons or solid‑state amplifiers.
| Part Number | VN-WGLD-0508-WR137 |
| Operating Frequency ( GHz ) | 5.85-8.2 |
| Impedance ( Ohm ) | 50 |
| VSWR | ≤1.02 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Interface | WR137(BJ70) |
| Dimension(mm) | As below |
| Handling Power | 6 CW(Watt, max) |
| ROHS Compliance | Yes |
|
|
| موك: | 5 قطع |
| السعر: | negotiable |
| طريقة الدفع: | خطاب الاعتماد، D/A، D/P، T/T |
| سعة التوريد: | 500 |
5.85-8.2GHz WR-137 WAVEGUIDE LOAD
A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.
Absorption of Microwave Energy:
A WAVEGUIDE LOAD converts electromagnetic wave energy into heat, preventing standing waves. Any high‑power system requires a WAVEGUIDE LOAD to terminate unused ports.
Reduction of Voltage Standing Wave Ratio (VSWR):
By absorbing nearly all incident power, a WAVEGUIDE LOAD maintains a low VSWR (typically <1.05), ensuring signal source stability and measurement accuracy.
Protection of Sensitive Components:
During transmitter testing or amplifier tuning, a WAVEGUIDE LOAD acts as a dummy antenna. Without a WAVEGUIDE LOAD, reflected power could destroy expensive devices such as magnetrons or solid‑state amplifiers.
| Part Number | VN-WGLD-0508-WR137 |
| Operating Frequency ( GHz ) | 5.85-8.2 |
| Impedance ( Ohm ) | 50 |
| VSWR | ≤1.02 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Interface | WR137(BJ70) |
| Dimension(mm) | As below |
| Handling Power | 6 CW(Watt, max) |
| ROHS Compliance | Yes |
